The Bendi model B40AC-DR B50AC-DR Bendi Electric Deep Reach Forklift will stack loads two deep in aisles as narrow as *96” (2.4 M) has a basic starting capacity of 2,500 lbs. (1,136 kg) at 24” (600 mm) load center and has lift heights available to 35′ 5″ (10.80 M). The reach from face to mast is 52” (1,321 mm) and the integral pantograph reach stroke is 41” (1,041 mm) The B40AC-DR B50AC-DR Bendi Electric Deep Reach Forklift has a 33” (838 mm) wide tilting and side shifting fork carriage.
The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The B40AC-DR / B50AC-DR can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.
- 2,500 lb. (1,136kg) and 3,000 lb. (1,364kg) Capacity at 24″ (600mm) Load Center
- Four-Wheel Design, Dual Rear Wheel Drive
- Integral 8″ (200mm) Stroke Sideshifter and 36″ (914mm) High Load Backrest
- Hydraulic Power Steering – Front Wheel Steer
- Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
- Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
The LSC stand up compact forklift makes stacking and dock work very easy. The short turning radius, high visibility mast and compact design help operators move materials at maximum efficiency. The LSC is excellent for manufacturing and warehouse environments, and efficiently works on the dock for loading/unloading trailers and containers; in bulk storage; drive-in rack, push-back rack and anywhere that loads need to be moved quickly and efficiently. The light weight of the LSC makes it suitable for multi-floor warehouses. The narrow width and short length make it possible to work in less space than any other stand-up model on the market today. The battery compartment has Teflon slides for easy slide-out from the left or right side of the truck. The narrow overhead guard is set up to work in narrow drive-in rack aisles.
- Two or Three Stage High Visibility Mast
- 2,500 lb. (1136kg) or 3,000 lb. (1364kg) Capacity
- Multi Function Control for Lift/Lower, Direction and Speed Control
- Single 24 Volt AC Traction and DC Pump Controller
- Tiller Controlled Hydraulic Power Steering
- Cantilevered Overhead Guard
- Thick Cushioned Rubber Floor Mat
- Horn, Battery Discharge Indicator and Hour Meter
- Left Foot-Operated Electric Deadman Parking Brake
- Right Foot-Operated Hydraulic Front Wheel Service Brakes
- 10″ x 5″ (250mm x 127mm) Smooth Poly Rear Drive/Steer Tire
- 14″ x 5″ (356mm x 127mm) Smooth Poly Front Load Tires
- Easily Removable Covers for Access to all Major Components
- Easily Replaceable Hydraulic Filter Element
- Battery Compartment Can be Set Up for Left or Right Removal
- Battery Compartment Slide Strips for Easy Side Removal
- 36″ (914mm) High Load Backrest and 34″ (864mm) Wide Fork Carriage
- 42″ (1067mm) Tapered Forks
- 3 Spool Hydraulic Control Valve
- Meets ANSI B56.1 Requirements
* Models available LSC25, LSC30
The Landoll Drexel FL40-EX and FL60-EX are explosion proof, electrically powered, front loading, 4-wheel electric forklifts with independently driven front wheel drive and rear wheel steering. The EX range is UL listed for operation in Type EX Class I, Division I, Group D and Class II, Division I, Group G flammable hazardous areas. The Capacities are available in 4,000 lbs. (1818kg) and 6,000 lbs. (2727kg) with two, three and four stage masts for lift heights to 250″ (6.35M). AC motors and controls make the EX range efficient and easy to maintain.
- Four-Wheel Configuration – Front Wheel Drive
- 36 Volt System
- Curtis AC Traction/Hydraulic Controllers
- Battery Discharge Indicator with Lift Interrupt
- Hydrostatic Power Steering
- 42″ Long Brass Covered Standard Taper Forks
- Automatic Return to Neutral, Overhead Guard
- Regenerative Service Brakes
- Spring Applied Parking Brake on Front Wheels
- Static Grounded Steer Tires
- RFI Suppressed to MIL-STD-461 (Class III C)
- Anderson Type N 150 Amp EX Connector
- Seatbelt (Retractable)
- Emergency Power Disconnect Switch
- 48″ (1200mm) High Backrest, Hour Meter
- Fire Extinguisher and Electric Horn
- Class III 36″ (914mm) Wide Carriage
* Additional model available FL60-EX
The Landoll 4-wheel Drexel R60i4H SwingMast® is an LP Gas powered, hydrostatically driven, front/side loading forklift with lift heights to 243″ (6.17M) and a lift capacity of up to 6,000 lbs. (2727kg) at 24″ (600mm) load center. This versatile lift truck has side loading capability for long heavy loads, while maintaining front loader capability and VNA stacking ability for standard pallets. The solid pneumatic tires allow operation on any indoor or outdoor surface including gravel and dirt.
-
Solid, Pneumatic-Style Drive and Steer Tires
-
LPG Engine, GM 4.3L Tier IV and LPG Fuel System (Tank Not Included)
-
Integrated Computer Controlled Hydrostatic Drive and Efficient Fuel System
-
Hydrostatic Power Steering with Tilt Steering Wheel
-
Dual Joystick Hydraulic Control Levers
-
23″ (584mm) of Shift Includes 2″ (51mm) of Reach
-
40″ (1016mm) Forks with Standard Bottom Taper and Class III Carriage and Long Load Handling Package
-
Dash Display Contains Engine Coolant Temperature Gauge, Hour Meter, Clock, Warning Icons and Display Function Buttons
-
Neutral Start, Anti Restart, Operator Presence Seat Switch
-
Adjustable Steering Column, Key Switch, Rear View Mirror, Horn and Seatbelt
The Drexel model SL60SE and SL80SE are high capacity SwingMast® models that work in aisles as narrow as 66″ (1.7M), have a basic capacity of 6,000 lbs. (2727kg), and up to 8,000 lbs. (3636kg) at 24″ (600mm) load center and have lift heights available to 289” (7.34M). The SL60SE and SL80SE are 4-Wheel SwingMast® VNA and Side Loading forklifts with independently driven front wheels and dual rear steer tires. The front mast rotates 90°, has side shift of 30” (762mm), allows easy stacking in Very Narrow Aisles. Both can work inside and outside on paved surfaces and can perform the jobs of high capacity front loading and side loading forklifts including working in bulk storage, cantilever rack, push-back rack, double deep and climbing steep ramps. The SL60 and SL80 range does the jobs of reach and counterbalanced trucks in aisles over 40% smaller. The ability to store and transport heavy long loads as a side loader increases versatility and maximizes utilization.
- Ergonomic Design for Exceptional Operator Comfort and Safety
- Dual Joysticks Control all Hydraulic Functions
- Hydrostatic Power Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- Adjustable Suspension Seat Improves Operator Comfort
- Large Battery Compartment Allows Maximum Battery Capacity for Long Run Times
- High Visibility Mast Allows Optimum Safety and View of Loads and Forks
* Additional model available SL80
The Drexel model SL30AC, SL40AC and SL50AC work in aisles as narrow as 56″ (1.4M), have a basic capacity of 3,000 lbs. (1363kg), 4,000 lbs. (1818kg) and up to 5,000 lbs. (2272kg) at 24″ (600mm) load center and have lift heights available to 31′ (9.45M). The SL30AC, SL40AC and SL50AC are 4-Wheel SwingMast® VNA and Side Loading Forklifts with independently driven front wheels and dual rear steer tires. The front mast rotates 90° and has side shift of 22” (500mm), allowing easy stacking in Very Narrow Aisles. These models can work inside and outside on paved surfaces and can perform the jobs of a normal front loading and side loading forklift including loading and unloading highway trucks and containers, working in bulk storage, drive in rack, cantilever rack, push back rack, double deep and climbing steep ramps. The SL range does the jobs of reach, counterbalanced trucks in aisles over 50% smaller. The ability to store and transport long loads as a side loader increases versatility and maximizes utilization.
- Single Joystick Controls Hydraulic Functions, Directional Control, Horn and Wire Guidance
- Hydrostatic Power Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- Adjustable Swivel Seat Improves Operator Comfort while Traveling in Reverse
- Large Battery Compartment Allows Maximum Battery Capacity for Long Run Times
- High Visibility Mast Allows Optimum Safety and View of Loads and Forks
* Additional models available SL40AC, SL50AC
The Drexel model SLT30AC and SLT35AC work in aisles as narrow as 56″ (1.4M), have a basic capacity of 3,000 lbs. (1363kg) or 3,500 lbs. (1590kg) at 24″ (600mm) load center and lift heights available to 26′ (7.92M). The SLT30AC and SLT35AC are 3-wheel front/side loading VNA forklifts with a single smooth rubber rear-drive/steer tire and solid poly-front load tires. The front mast rotates 90° and has side shift of 20” (500mm), allowing stacking easily in Very Narrow Aisles. Both models can work inside and outside on paved surfaces, can perform the jobs of a normal front loading forklift (including loading and unloading highway trucks and containers, working in bulk storage, drive in rack, push back rack, double deep and climbing steep ramps). The SLT30AC/SLT35AC range does the jobs of reach and counterbalanced trucks in aisles over 50% smaller. The rear steering and drive allow turning in short-cross aisles further increasing the storage density when compared to counterbalanced trucks.
- Ergonomic Design for Exceptional Operator Comfort and Safety
- Single Joystick Controls Hydraulic Functions, Directional Control, Horn and Wire Guidance
- Electronic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- The Adjustable Swivel Seat Improves Operator Comfort while Traveling in Reverse
- An Electro/Mechanical Parking Brake is Automatically Applied When Power is Turned Off or the Operator Leaves the Seat
- High Visibility Mast Allows Optimum Safety and View of Loads and Forks
* Additional model available SLT35AC
The Bendi model B40i4 works in aisles as narrow as *78″ (1.98M), has a basic capacity of 4,000 lbs. (1818kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). The LP Gas engine provides the ability to run 24/7 without battery changing or charging. The B40i4 is a 4-wheel articulating forklift with dual rear-drive tires and soft-poly front load tires. The hydrostatic drive provides excellent traction and braking, high speed capability and power to enable climbing steep ramps with loads. Three or four stage masts are available making this unit excellent for loading/unloading trailers, containers and highway trailers. The B40i4 can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B40i4 does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.
- Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
- DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- Engine RPM is Controlled Automatically for all Hydraulic Functions without the Need for an Inching Pedal
- High Visibility Mast Allows Optimum Safety and Control
- Hydrostatic Braking Assures Automatic Smooth and Safe Braking when the Operator Removes Foot from the Accelerator Pedal
The Bendi models B55AC and B55AC-HL work in aisles as narrow as *84″ (2.13M). The B55AC-HL (High Lift) Model has a basic capacity of 4,500 lbs. (2045kg) and lift heights available to 41’ (12.5M). Both the B55AC and the B55AC-HL models are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available. Both models can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles.
- The B55AC-HL has a Fixed Mast and Tilting Carriage for Reduced Mast Deflection and Load Movement at High Elevations
- Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
- DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
- Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
- High Visibility Mast Allows Optimum Safety and Control