The Landoll Drexel FL40-EX and FL60-EX are explosion proof, electrically powered, front loading, 4-wheel electric forklifts with independently driven front wheel drive and rear wheel steering. The EX range is UL listed for operation in Type EX Class I, Division I, Group D and Class II, Division I, Group G flammable hazardous areas. The Capacities are available in 4,000 lbs. (1818kg) and 6,000 lbs. (2727kg) with two, three and four stage masts for lift heights to 250″ (6.35M).  AC motors and controls make the EX range efficient and easy to maintain.

• Four-Wheel Configuration – Front Wheel Drive
• 36 Volt System
• Curtis AC Traction/Hydraulic Controllers
• Battery Discharge Indicator with Lift Interrupt
• Hydrostatic Power Steering
• 42″ Long Brass Covered Standard Taper Forks
• Automatic Return to Neutral, Overhead Guard
• Regenerative Service Brakes
• Spring Applied Parking Brake on Front Wheels
• Static Grounded Steer Tires
• RFI Suppressed to MIL-STD-461 (Class III C)
• Anderson Type N 150 Amp EX Connector
• Seatbelt (Retractable)
• Emergency Power Disconnect Switch
• 48″ (1200mm) High Backrest, Hour Meter
• Fire Extinguisher and Electric Horn
• Class III 36″ (914mm) Wide Carriage

* Additional model available FL60-EX

The Landoll 4-wheel Drexel R60i4H SwingMast® is an LP Gas powered, hydrostatically driven, front/side loading forklift with lift heights to 243″ (6.17M) and a lift capacity of up to 6,000 lbs. (2727kg) at 24″ (600mm) load center. This versatile lift truck has side loading capability for long heavy loads, while maintaining front loader capability and VNA stacking ability for standard pallets. The solid pneumatic tires allow operation on any indoor or outdoor surface including gravel and dirt.

• Solid, Pneumatic-Style Drive and Steer Tires

• LPG Engine, GM 4.3L Tier IV and LPG Fuel System (Tank Not Included)

• Integrated Computer Controlled Hydrostatic Drive and Efficient Fuel System

• Hydrostatic Power Steering with Tilt Steering Wheel

• Dual Joystick Hydraulic Control Levers

• 23″ (584mm) of Shift Includes 2″ (51mm) of Reach

• 40″ (1016mm) Forks with Standard Bottom Taper and Class III Carriage and Long Load Handling Package

• Dash Display Contains Engine Coolant Temperature Gauge, Hour Meter, Clock, Warning Icons and Display Function Buttons

• Neutral Start, Anti Restart, Operator Presence Seat Switch

• Adjustable Steering Column, Key Switch, Rear View Mirror, Horn and Seatbelt

The Drexel model SL60SE and SL80SE are high capacity SwingMast® models that work in aisles as narrow as 66″ (1.7M), have a basic capacity of 6,000 lbs. (2727kg), and up to 8,000 lbs. (3636kg) at 24″ (600mm) load center and have lift heights available to 289” (7.34M). The SL60SE and SL80SE are 4-Wheel SwingMast® VNA and Side Loading forklifts with independently driven front wheels and dual rear steer tires. The front mast rotates 90°, has side shift of 30” (762mm), allows easy stacking in Very Narrow Aisles. Both can work inside and outside on paved surfaces and can perform the jobs of high capacity front loading and side loading forklifts including working in bulk storage, cantilever rack, push-back rack, double deep and climbing steep ramps. The SL60 and SL80 range does the jobs of reach and counterbalanced trucks in aisles over 40% smaller. The ability to store and transport heavy long loads as a side loader increases versatility and maximizes utilization.

• Ergonomic Design for Exceptional Operator Comfort and Safety
• Dual Joysticks Control all Hydraulic Functions
• Hydrostatic Power Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Adjustable Suspension Seat Improves Operator Comfort
• Large Battery Compartment Allows Maximum Battery Capacity for Long Run Times
• High Visibility Mast Allows Optimum Safety and View of Loads and Forks

* Additional model available SL80

The Drexel model SL30AC, SL40AC and SL50AC work in aisles as narrow as 56″ (1.4M), have a basic capacity of 3,000 lbs. (1363kg), 4,000 lbs. (1818kg) and up to 5,000 lbs. (2272kg) at 24″ (600mm) load center and have lift heights available to 31′ (9.45M). The SL30AC, SL40AC and SL50AC are 4-Wheel SwingMast® VNA and Side Loading Forklifts with independently driven front wheels and dual rear steer tires. The front mast rotates 90° and has side shift of 22” (500mm), allowing easy stacking in Very Narrow Aisles. These models can work inside and outside on paved surfaces and can perform the jobs of a normal front loading and side loading forklift including loading and unloading highway trucks and containers, working in bulk storage, drive in rack, cantilever rack, push back rack, double deep and climbing steep ramps. The SL range does the jobs of reach, counterbalanced trucks in aisles over 50% smaller. The ability to store and transport long loads as a side loader increases versatility and maximizes utilization.

• Single Joystick Controls Hydraulic Functions, Directional Control, Horn and Wire Guidance
• Hydrostatic Power Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Adjustable Swivel Seat Improves Operator Comfort while Traveling in Reverse
• Large Battery Compartment Allows Maximum Battery Capacity for Long Run Times
• High Visibility Mast Allows Optimum Safety and View of Loads and Forks

*  Additional models available SL40AC, SL50AC

The Drexel model SLT30AC and SLT35AC work in aisles as narrow as 56″ (1.4M), have a basic capacity of 3,000 lbs. (1363kg) or 3,500 lbs. (1590kg) at 24″ (600mm) load center and lift heights available to 26′ (7.92M). The SLT30AC and SLT35AC are 3-wheel front/side loading VNA forklifts with a single smooth rubber rear-drive/steer tire and solid poly-front load tires. The front mast rotates 90° and has side shift of 20” (500mm), allowing stacking easily in Very Narrow Aisles. Both models can work inside and outside on paved surfaces, can perform the jobs of a normal front loading forklift (including loading and unloading highway trucks and containers, working in bulk storage, drive in rack, push back rack, double deep and climbing steep ramps). The SLT30AC/SLT35AC range does the jobs of reach and counterbalanced trucks in aisles over 50% smaller. The rear steering and drive allow turning in short-cross aisles further increasing the storage density when compared to counterbalanced trucks.

• Ergonomic Design for Exceptional Operator Comfort and Safety
• Single Joystick Controls Hydraulic Functions, Directional Control, Horn and Wire Guidance
• Electronic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• The Adjustable Swivel Seat Improves Operator Comfort while Traveling in Reverse
• An Electro/Mechanical Parking Brake is Automatically Applied When Power is Turned Off or the Operator Leaves the Seat
• High Visibility Mast Allows Optimum Safety and View of Loads and Forks

* Additional model available SLT35AC