The Bendi model B40AC-DR B50AC-DR Bendi Electric Deep Reach Forklift will stack loads two deep in aisles as narrow as *96” (2.4 M) has a basic starting capacity of 2,500 lbs. (1,136 kg) at 24” (600 mm) load center and has lift heights available to 35′ 5″ (10.80 M).  The reach from face to mast is 52” (1,321 mm) and the integral pantograph reach stroke is 41” (1,041 mm) The B40AC-DR B50AC-DR Bendi Electric Deep Reach Forklift has a 33” (838 mm) wide tilting and side shifting fork carriage.

The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires.  The B40AC-DR / B50AC-DR can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

• 2,500 lb. (1,136kg) and 3,000 lb. (1,364kg) Capacity at 24″ (600mm) Load Center
• Four-Wheel Design, Dual Rear Wheel Drive
• Integral 8″ (200mm) Stroke Sideshifter and 36″ (914mm) High Load Backrest
• Hydraulic Power Steering – Front Wheel Steer
• Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators

The Bendi models B55AC and B55AC-HL work in aisles as narrow as *84″ (2.13M). The B55AC-HL (High Lift) Model has a basic capacity of 4,500 lbs. (2045kg) and lift heights available to 41’ (12.5M). Both the B55AC and the B55AC-HL models are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available. Both models can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles.

• The B55AC-HL has a Fixed Mast and Tilting Carriage for Reduced Mast Deflection and Load Movement at High Elevations
• Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
• DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
• High Visibility Mast Allows Optimum Safety and Control

The Bendi models B55AC and B55AC-HL work in aisles as narrow as *84″ (2.13M). The B55AC high volume model has a basic capacity of 5,500 lbs. (2500kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). Both the B55AC and the B55AC-HL models are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available. Both models can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles.

• B55AC 5,500 lb. (2500kg) Capacity at 24″ (600mm) Load Center
• Ergonomic Design for Exceptional Operator Comfort and Safety
• Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
• DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
• High Visibility Mast Allows Optimum Safety and Control

The Bendi model B40VAC works in aisles as narrow as *72″ (1.8M), has a basic capacity of 4,000 lbs. (1818 kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). This high performance VNA Model has fast travel speeds and can climb steep ramps. The Bendi B40VAC is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three masts are available making this unit excellent for loading/unloading trailers and containers. The B40VAC can also work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B40VAC does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

• Ergonomic Design for Exceptional Operator Comfort and Safety
• Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
• Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
• High Visibility Mast Allows Optimum Safety and Control

The Bendi model B40AC works in aisles as narrow as *78″ (1.98M), has a basic capacity of 4,000 lbs. (1818 kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). The Bendi B40AC is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available making this unit excellent for loading/unloading trailers and containers. The B40AC can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

• Ergonomic Design for Exceptional Operator Comfort and Safety
• Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
• DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
• High Visibility Mast Allows Optimum Safety and Control

The Bendi model B30AC works in aisles as narrow as *78″ (1.98M), has a basic capacity of 3,000 lbs. (1363 kg) at 24″ (600mm) load center and has lift heights available to 26′ (7.92M). The Bendi B30AC is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available making this unit excellent for loading/unloading trailers and containers. The B30AC can also work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B30AC does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

• Ergonomic Design for Exceptional Operator Comfort and Safety
• Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
• DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
• High Visibility Mast Allows Optimum Safety and Control

The Bendi model B3/30AC works in aisles as narrow as 72″, has a basic capacity of 3,000 lbs.at 24″ load center and has lift heights available to 30′. The Bendi B3/30AC is a 3-wheel articulating forklift with a single poly front drive tire and solid rubber rear tires. Front articulation of 200°, narrow mast and a compact front end allow easy stacking in Very Narrow Aisles. The B3/30AC can work inside and outside on paved surfaces. The versatile Bendi B3/30AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. All tires on the Bendi B3/30AC are 18″ diameter and the truck has great under clearance for avoiding floor obstructions.

• 3-Wheel Design, Single Front Wheel Drive Provides Excellent Maneuverability and Traction
• Ergonomic Design for Exceptional Operator Comfort and Safety
• Integral Sideshifter Makes Placing and Picking Loads Effortless
• DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
• LandActive Control Provides Enhanced Traction Control Based on Steering Angle
• Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
• High Visibility Mast Allows Optimum Safety and Control